OdoBan is a product many people haven’t used or even heard of. But it’s a product that can change your concept of cleaning solutions or disinfectants. It will clean your carpet. Kill all the foul odors and disinfect your carpet perfectly. Despite being a chemical product, its specialty is not toxic and one of the safest regular using products in the industry. Because of its traditional research and development, it is now being praised globally. So, can you use OdoBan on a carpet cleaner? You surely can. But make sure not to use it in a steam cleaner. You can not use it in something that heats the product before using it.
Which variants can you use on the carpet?
There are two types of OdoBan brands that you’ll get the best result using on a carpet. Those are- 1) OdoBan 3-in-1 carpet cleaner and 2) OdoBan pet.
OdoBan 3-in-1
Three products are included in this: traffic lane pretreatment, extraction cleaner, and a spot remover. It suspends dirt to reduce tear. The significant benefit is that it doesn’t leave any residue on the carpet. So you don’t need to worry about the return of the stains.
Directions to use
Before using any cleaning agent, you should always test it in a small hidden area. As it can discolor the carpet. The same formula goes for this. Sometimes previously used cleaners leave residues. It can react with them too. So be careful about that also.
Places to use
You can dilute it as traffic lane pre-spray or spot remover on any carpet that is water safe. You can use it with any liquid-extraction carpet cleaning tool.
Applying process
Before using it, vacuum the whole carpet properly. Remove loose soils from the surface.
Take a sponge, blot up to extract any remaining or wet soil. Try not to rub, as it can make soils to penetrate the carpet. Now follow the steps-
Step 1. Traffic lene pretreatment for sprayers
Mix it with water in a 1:16 ratio in an industrial sprayer. Then pretreat the heavy traffic areas. You can use a bonnet cleaning machine too. Let the soil loose up for around 5 minutes.
Step 2: Spot remover
Dilute it at a ratio of 1:32 by water. Directly spray the solution to desired places. Give 5 minutes to the dirt to loosen. Then you can blot with a cloth. But extraction cleaning is recommended for better results.
Step 3: Extraction cleaner
You should follow the recommended dilution. That is 1:16 with water. But for extraction cleaning, you’ll be needing to use hot water. Continue to spray with the sprayer. And use a vacuum cleaner for removing all the dirt.
This method is 100% safe for your carpet. As all the chemicals get washed off. Besides, no residues remain on the carpet. But you have to dry the carpet out completely. Or else it can grow molds.
OdoBan Pet
Being a pet owner can be hard sometimes. As they can make your carpet dirty anytime. But you can’t always clean them as pet urine can cause a stubborn stain. The smell of dog urine even stays after cleaning the spot. OdoBan pet comes to the rescue; its oxygen-activated stain remover clears the area with ease and kills the odor completely.
Directions to use
Step 1:
Mix the OdoBan and the water at a ratio of 1:4. Now for recent urine, soak the liquid with a paper towel by applying pressure. Again do not try to rub, or else you’ll damage the carpet fiber and change appearance.
If there is liquid to soak, then apply OdoBan directly to the spot. Just make the stain wet. Do not soak the carpet too much. Leave it for ten minutes. Press and dry the spots with the help of a clean cloth. Try not to scrub.
Step 2:
If the stain is old and dried. Then the stain must have soaked deep into the carpet. It will be hard to remove the smell completely. Apply the solution to the stain. Let it sit for a longer time. As it will allow it to get to the source of the smell. Then use an extractor or vacuum to extract the solution completely.For old stubborn odors, you have to repeat the process several times for thorough cleaning.
Step 3:
Now, if you have to remove pet stain and odor from a more significant area, you’ll have to take the help of an extraction cleaner. It will cover a larger area to clean the carpet. Extraction cleaner will help to clean old stains too. The stronger spray will let the solution reach deep into the carpet’s fibers and loosen the stain. Replace the older solution with a new one if needed.
Extract the solution entirely from the carpet. Then replace the solution in the machine with normal water. Then run the device over the carpet. It’ll rinse all the remaining residues. Dry the carpet properly. It is critical.
Some safety reminders
- Always follow the directions on the label
- Never measure OdoBan using cups that you’ll use to measure food
- Do not mix it with chemicals or other products ever
- Never use the solution with any machine that heats the solution
- Drying the carpet after cleaning is a necessity
Conclusion
Keeping the carpet clean and smell-free lets you maintain a healthy atmosphere in your house. That ultimately keeps you and your family healthy. OdoBan helps you in that. As it disinfects your carpet too. After cleaning your carpet, it leaves a freshening smell behind. It comes with several fragrances. Add some extra features so that it can help your carpet to dry even 75% faster.