Here are the complete guides for using vinegar in a carpet cleaner. vinegar is one of the products that we use in several recipes. But it has a different role in people’s lives too. It is a natural cleaning agent. Whether it is any kitchen product or any bedroom product, vinegar not only cleans it but disinfects it also. But can you use vinegar in a carpet cleaner?
Well, yes, you can. Vinegar is more effective than many cleaning solutions. It doesn’t include any harmful chemicals. It only needs water to dilute, and then it’s ready to clean your carpet.
Is vinegar good for cleaning carpets?
Now, if you are concerned, is vinegar good for cleaning carpets? It is. If you want to experience a deep cleaning experience without spending money on professional cleaners, vinegar is the best option you can go with. It cleans the whole carpet, clears stains, disinfects your carpet, and removes foul odors.
There are several different processes to apply vinegar on the carpet, such as;
How to use vinegar to clean carpets
Clean stain with vinegar
You can use vinegar as a stain remover. Pet stains, chocolate or wine stains can be removed by it. But you have to go for the cleaning immediately after the stain is made. Old dried stains are tough for vinegar as you have to use more vinegar on those stains. And using too much vinegar can lead to permanent fiber damage.
Use vinegar in a limited quantity. Take 50-50 amounts of vinegar and water. Mix them and apply them in the following steps-
- If it’s a spill of any liquid like coffee or hot chocolate, remove the liquid immediately. Take a towel or rag, put it on the spot. Put pressure and blot the spill. Don’t rub it, or the liquid will go further into the carpet.
- Once you are done, spray the solution you made on the spot. Use a sprayer. The vinegar will make some fizz. When covering the spot, leave it there to sit for some time. While getting soaked into the stain, vinegar will start its job.
- After the vinegar is soaked, take another clean rag. Put it there and soak the vinegar with the clean rug. If you want to rub, go very gentle. The best way is to dab. Once the vinegar is removed completely, there won’t be any stain left.
For a little older stains, you’ll need to use vinegar in a more significant amount. You might need to double the vinegar part in the solution. As it’s not always safe for every type of carpet, you should first apply it on a hidden part. If you are 100% sure about it, only then apply it to the stain.
- The first step is the same, as you need to spray the solution on the stain with a sprayer. Let it be there to get soaked in the stain.
- If you feel this won’t work on your stain, then instead of spaying, go for the scrub method. Dip a scrubbing brush into the solution. Then scrub the area. But you need to keep in mind that scrubbing is not recommended for any carpet. So scrub very gently to work the vinegar in the stain. This time you need to leave it the whole night.
- Take a towel dipped into the water. Then clear the stain with it. It should give the best result against the old stubborn stain.
Use vinegar in a steam cleaner
A steam cleaner is another great option to clean your carpet. Now you can use the steam cleaner with several different solutions. Three solutions are the most popular among them. One is to use it as a shampooer, which means using shampoo. But it can be too expensive. Then comes several solvents, which can be harsh for your carpet if you don’t use them carefully. Now another option is to use a vinegar solution. It is not expensive, does not include any foreign chemicals, and it’s easy to get. So it is best to steam clean your carpet with water and vinegar solution following the steps below;
- If there is furniture or other stuff on the carpet, you need to move them out of the room. Or at least on a particular side, so that you can move properly and reach every portion of the carpet.
- If you are going for a deep clean of the carpet, you should pretreat it, especially the high traffic areas. The exciting part is you can also make a pretreatment solution with vinegar. Dilute the vinegar and use a scrubbing brush. With the brush, work the solution on the carpet gently. Now you have to leave it until it dries completely.
- After that, vacuum the carpet thoroughly, especially in the area you’ve pretreated. It’ll make sure no loose dirt or pretreatment is left on the carpet.
- Now fill the tank with hot water. Remove it from the machine, then fill it. It should be having the marks of capacity. Pour half the tank with water. Then add white vinegar to fill the other half. Once done, put it back in its place. To fill the tank, you can use a measuring cup to be entirely sure about the liquids’ quantity.
- Now start cleaning the carpet. Start with a corner and move with the machine like a vacuum cleaner. You should clean the carpet by moving backward. And try to overlap half of the previous passes by the new pass every time.
- When the tank is empty, you have to refill it with the same solution. But before that, you need to empty the vacuum tank. It is filled with dirty water by now. It contains the same quantity as the water tank can hold water. So you need it to be empty too. Once done, refill the tank, put both reservoirs back and start over.
- Different steam cleaners have different techniques to use the steamer and vacuum. Use yours accordingly. But try not to press too hard and move the machine slowly. Cover the whole carpet. Then start over and make the strokes again and continue with overlapping. But the second time is to make sure there is no moisture left on the carpet. So you need to use only the vacuum mode.
- If you are sure there is no dirt left along with any extra moisture, leave the carpet to dry completely. Do not bring back the furniture until it’s dry, and try not to walk on the wet carpet either.
Other ways to use vinegar in a carpet cleaner
As vinegar can be used with water on carpet to clean it, there are several different ways you can use it. And there are many other cleaning agents with whom you can add vinegar to make great solutions to eliminate any stains. Some of them are-
A combination of baking soda and vinegar is trendy. Both of these are excellent cleaning agents. As baking soda has a remarkable ability to absorb the stain, the vinegar works and loses the fiber’s stain material. Now, if you put them together against the stains, there is no way the stain will remain on the carpet after you are done.
- Remove all the liquid on the stain with a cloth or towel. Bloating would do the work, while rubbing can make your work harder.
- Now sprinkle the required amount of baking soda on the spot. Make sure to cover the spot entirely. If the stain is too old, you’ll be needing to scrub it. Use a scrubbing brush for scrubbing the area. Do not go too harsh as it can damage the fibers. Just try to work the powder into the fibers of the stained area.
- After that, take a sprayer. Fill it with a mixture of vinegar and water. In the mixture, there should be half of the water and half vinegar for everyday stains. Spray that on the powder. That’ll make a fizz first, and then a paste will form. But again, for old stains, you need to use more power. So, diluted vinegar won’t work. You have to take 100%vinegar. But using 100% vinegar can harm the dye. So make sure it is safe first. Apply it, make the paste. Then leave it until it dries completely.
- After it dries, you have to use a vacuum to remove the baking soda from the carpet. Vacuum it twice to be sure no residue is left behind. Your carpet will be stainless again.
You can make baking soda and vinegar solution before using it on the carpet. It works the same. Just mix baking soda into a sprayer with diluted vinegar. Then spray on the spot. Let it dry and vacuum it. You’ll get a similar result.
Dish soap is another product with excellent cleaning properties. Along with stains on dishes, it can clean mattresses, rugs, or upholsteries. But it has a mild problem. Dish soaps generally leave residues on the things it is applied to. As the dishes can be adequately rinsed after a wash, it doesn’t create any problem. But you can’t rinse the carpet or upholstery like that. So the residues will remain on them and create an even worse stain later. But if you use vinegar with dish soap, you won’t face the same scenario. Vinegar will clear the residues too.
- Because you are using a solution on the carpet, it is necessary to remove the dust. Use a vacuum cleaner to do the job. Vacuum the entire carpet properly. Once done, vacuum the other side too. It’ll make sure there is no loose or dry dirt on the carpet.
- Then make your cleaning solution. Take 3 or 4 cups of vinegar and mix it with warm water to dilute it. Then add dish soap to it. When the mixture is ready to test it on a place where the eyes don’t go usually. It’ll make sure the solution doesn’t ruin the dye of the carpet. Otherwise, it can cause big patches on the carpet.
- Now you need to scrub the solution onto the stain. With this solution, you can clean a stain or clean the whole carpet. Just take a brush, or a clean cloth will do the job too. Dip it into the solution and scrub in a particular direction. Whichever scrubber you are using, do not go too hard. If you scrub too hard with a brush, it’ll ruin the fibers. On the other hand, the cloth will push the stain farther into the carpet or spread it more around the spot. So, take your time and scrub the carpet gently and slowly.
- The next step is to rinse it. As you are using dish soap, rinsing is a necessary step. It’ll be best if you can take the carpet out to hang it somewhere. Then rinse it well with a water pipe. But if that’s not possible, take a clean rag and a bucket full of water. Dip the cloth and rinse the carpet thoroughly. Repeat until entirely sure that the solution is completely wiped.
- Then you have to dry the carpet very well. Leaving any water into the carper will make it generate a lousy odor. Besides, you can have mold problems too. So if you can, hang it somewhere in the open air. Then squeeze the excess water out. If you don’t have that option, open the windows and leave the carpet alone until it dries completely.
Cleaning a carpet doesn’t mean only removing dust or any stains. Proper cleaning means disinfectants and odor removal too. Vinegar does all of them. If your carpet smells bad, you can apply diluted vinegar and let it absorb the odor. Then rinse it. You’ll get a clean, stain-free, and odor-free carpet.
But vinegar has acidic properties and some bleaching too. So using it too much can damage the dye or even the fibers. Besides, you’ll get some pickle smells from the carpet. So always use it diluted. And you also can add some essential oil for a better smell.