Here is how to clean hoover carpet clean, with step by step guides. A carpet cleaner keeps your carpet and upholstery clean and clear. Hoover carpet cleaner does it with great efficiency. But to keep the cleaning process optimum, you need to clean the machine itself after every time you clean the carpet. If you continue the machine without cleaning it, it won’t serve you properly. Even it can damage the machine.
So, How to clean Hoover Carpet cleaner? Well, it’s effortless to do the job. As you don’t need any extra tool to do it and the parts can be snapped on and off. Along with that, you don’t need any chemicals too. For this cleaning process, all you need is a damp cloth. And, you should be careful while cleaning. So, follow the steps below to clean the machine properly.
How To Clean Hoover Carpet Cleaner Machine- Step By Step Guides
Step 1
After you are done cleaning your carpet, switch the Hoover carpet cleaner off. Then the power cord needs to be removed from the socket. Make sure not to disassemble any machine while the power cord is plugged in. Then you should look for the solution tank, placed at the front side of the handle. The tank has a handle of its own, used to lock the tank with the machine. Press the handle downward and unlock it. Pull the tank away to keep aside.
Step 2
For the recovery tank that stores the dirty water, there are different lock systems. You’ll find a release button in front of the machine handle. For releasing it from the carpet cleaner, you need to press the button.
If you can’t find the button, there will be two latches on both sides of the tank. Open them both to release the tank. Now pull it and keep it with the solution tank.
Step 3
After removing both tanks, uncap them. The solution tank has a smaller cap with an inbuilt measuring cup. Rotate it anti-clockwise to open. But the recovery tank has a bigger lid and latch to lock. Unlock the latch and remove the whole lid.
Take them to the sink for disposing the water. Empty them both and rinse them one by one with hot water. First, rinse the solution tank properly and ensure no residue is left as the chemical can harm. Then go for the recovery tank. Rinse several times to clean all the dirt from it. The corners and the rubber airlocks or the laches can hold the dirt in. clean them carefully.
Step 4
After the tanks, you should go for the nozzle. To do that, you need to remove it from the carpet cleaner. Lift it on the meeting point of the base of the handle and the head of the cleaner. Then slide it off the machine. You can use a damp towel to wipe the nozzle. Also, make sure to wipe the cleaner head so that there will be no dirt or debris left.
Now you have to put the nozzle back. For that tilt, the machine can take the cleaner head up. Then slide the nozzle to its place.
Step 5
Now press the handle release button at the base of the handle. Pop the handle back all the way to the floor. Then go for the brushes in the cleaner head. Grab them and pull them out. Take them to the sink too. Put them under the tap water and rinse well. Don’t let any grime or dirt on them. You can use hot or cold water.
After washing them, take them to the slot. Align them properly as they were before. Then push them hard and set them into the head. Be careful while aligning them.
Step 6
Once you are done resetting the brushes, look for the brush filter. It will have a frame under the brushes. Usually, you’ll find the brush filter beneath the second brush from the hoover carpet cleaner’s right side. After locating, grab, and pull it firmly until it comes out. Stop pulling when the frame stops coming out, and start cleaning it.
Again take a towel and saturate with water. Wipe the frame and filter properly to clear the dirt and soil. Then push it back in its place. With this, the whole machine is cleaned. Let the parts dry and assemble them to keep aside. It’ll be ready to be your cleaning partner once again.
Conclusion
It is important to keep the interior clean, especially the carpet and upholstery. But the cleaning of the cleaners is similarly important. The carpet cleaners get all the dirt and soil from the carpet and upholstery. It has several areas where the dirt can stick. Afterward, instead of cleaning, they will spread the disease. Besides, the solution tank stores chemical solutions with water.
So if you don’t clean it carefully, the chemical residue can remain there. As they are chemicals, they can easily harm or create an allergic reaction the next time you use them. You can use any cleaning agent to clean it, but hot water is enough for a hoover carpet cleaner to clean it as new.