
We all need fresh and clean carpet as a dirty carpet looks bad and brings up harmful germs. But it’s not always an easy task to keep the carpet from germs. To keep the clean carpet one of the best ways is to steam clean it. Steam cleaner keeps the carpet clean and disinfects it efficiently. But what if a steam cleaner is not available? As it is inconvenient and costly too. So how do sanitize carpet without steam cleaner? Well, need not worry because there are several home remedies and ways to sanitize your carpet without it. Below are the guides of How To Sanitize Carpet Without Steam Cleaner.
Sanitize Carpet Without Steam Cleaner- The Guides
Use vacuum cleaner
Vacuum cleaners can keep your carpet clean if you use it regularly and properly. It can remove all the loose dirt along with the dust. If you don’t let the dust to set on the carpet, the chances of germ development decreases. Just choose the best one for your carpet. To get the best result, make sure to vacuum properly. Remember All the dirt from any other things in your room ultimately comes down to the floor. And the carpet covers the floor. So first complete your regular cleaning routine. Then go for the carpet.
You should start from the corner, then follow the wall to wall technique. Try to give attention to the hard to reach points. Because those are the main portion to generate germs.
Use sunlight
Sunlight is probably the best disinfectant that nature gave us. It’s a tradition for many people to keep lots of things in open sunlight before using. As it kills various amounts of bacteria and viruses. So you can surely use it as a natural sanitizer to disinfect your carpet.
Take your carpet outside or to the balcony. To get rid of the dust shake the carpet properly and use a broom then. Beat the carpet to get rid of any loose dirt or remaining dust. Hang it in the sunlight and leave it for a quality amount of time. That’s all you have to do. This procedure doesn’t take too much of your time. You don’t even have to spend a single rupee for this. But you’ll definitely get satisfactory results.
Use snow
If you live in a place where it snows, then you can use it to sterilize your carpet. As sunlight snow is also a special gift from nature that can deep-clean the carpet. Like the previous process, you have to take the carpet out. Get rid of all the loose dirt. Then you have to collect plenty of snow from the yard to cover the carpet. It should be at least five-inch thick. To spread the snow evenly, you can use a broom.
The snow has ammonia in it. The cold air helps it to solidify all the dirt, hiding deep inside the carpet. Now you need to leave it for half an hour. Then flip the carpet and get rid of all the snow along with dirt. The germs will go off the dirt too. Besides, several germs that live in the carpet can not tolerate snow.
Now, repeat the process 2-3 times. Then make sure all the snow is gone. Hang the carpet for some time more. The remaining snow will evaporate.
Use A Homemade Disinfectant Solution
If naturally, sanitization is not possible for some reasons. Or you feel those processes tiring. You can make your homemade sanitizer for the carpet and use it. For best result follow the steps-
Clear area
If your carpet is a center carpet, then you can reach every portion of it easily. But in the case of the wall-to-wall carpets, it’ll be a different scenario. So in that case, remove all the furniture or the other things that are on the carpet.
Dust the whole carpet with a brush or broom. Well, vacuuming will be better, though. You can apply some baking soda and leave it for the time being you make the mixture. As it surely will help you kill the germs better.
Prepare disinfectant solution
Mix dish soap and diluted vinegar together. Keep mixing the solution until it becomes fizzy. Vinegar can damage the color of the carpet sometimes. So apply the mixture in a small portion to test the effect. If you find the colour to be even slightly pale, don’t use the solution. As it will kill the dye. Make a new solution with more diluted vinegar then try again. This mixture has stain removing agents in it. You can use it to remove remove spot as well.
Scrub
Take a scrubbing brush and dip into the mixture. Then scrub corner to corner way. Don’t use too much of the mix. You don’t want your carpet to be saturated by it. As the agents can harm it. Just wet the carpet and advance. But try to keep the pressure a little hard on any stain. It helps you to get rid of the stain. Once you cover the whole carpet, leave it for a few minutes. The disinfectant will do its work in that time.
Rinse the carpet
After about five minutes, take cold water and a clean towel. Wet the towel and start rubbing the whole carpet. It will clear all the germs and dirt. Keep doing it until the complete solution is removed. Keep cleaning the towel during rubbing.
Vacuum the carpet
Let the carpet dry completely. You can use a fan to make it faster. Once it’s completely dried, vacuum it thoroughly. It will make sure nothing is left on the carpet.
Conclusion
After cleaning or disinfecting the carpet, you need to try to keep it clean as long as you can. For that, you should clean your carpet as soon as any food particles fall on the floor. If any spilling accident happens that creates any stain, try not to let it stay there for long. As these can create an unhealthy atmosphere in the carpet.
Another thing you can do is to keep everyone, including yourself, from coming in wearing shoes. The shoe gets the most amount of dirt and germs from outside. Keep your carpet clean and stay healthy.