Owning a carpet leads you to the common question of how can you clean it. There are several ways to clean any carpet, including stained ones. But the best way is to use a carpet cleaner to clean a carpet. A deep clean with any steam cleaner will give you a perfectly cleaned and disinfected carpet for a year.
You can use Hoover steam vac carpet cleaner to get a great experience. It looks like a general Hoover vacuum cleaner, but it uses hot water and a cleaning solution to deep clean your carpet. And then a powerful vacuum to extract dirty water. If you want to know How to use Hoover steam vac carpet cleaner, you need to read below.
You can clean the carpet with Hoover steam vac. But to clean like a pro, you need to follow the steps properly.
Things You Need To Do Before getting Started
Get a carpet cleaning solution:
There are different types of solutions for various purposes. Hence, you have to buy it as per your requirements. If you want to clean the carpet for just dust and everyday dirt, you need to buy the solution according to that. Otherwise for cleaning the old dried stains, you’ll find a different solution that. There are solutions for food spills or other purposes too.
You can purchase any brand you prefer. But as you are using a hoover steam vac, a cleaning solution from the same brand will do the best.
Clear the area:
You need to move on the carpet properly to clean it. That’s why you need space. Besides you need to reach all the parts of the carpet. So the furniture needs to be moved from the room. Move them to the out of the room or the other room. If you don’t have enough space in the other room, you can move at least some of them and move the rest to a particular side of the carpet. Clean the clear side then bring them to that area and clean rest.
If you can’t move a single piece of furniture, you need to cover the legs with a plastic wrapper or a foil.
Vacuum the whole area before cleaning:
You need to clean the carpet with a vacuum as there can be pet hairs, human hairs, or any loose dirt. Regular dust needs to be cleaned too. The steam vac can not be used to clean dry dirt, so you have to use a regular vacuum cleaner.
If your carpet has dry or stubborn food spills or any stains, you need to pretreat them with a suitable stain remover for your carpet. Always give them time to the pretreatment before starting cleaning to work it well.
Prepare the Hoover Steamvac carpet cleaner
Fill the water tank:
The steam vac has a normal water tank on the up and a dirty water tank beneath that. Remove the normal water tank by pressing the handle downward, and it’ll unlock the handle. Then unscrew the lid. The lid itself is a measuring cup, always use that to fill the tank to avoid overfilling.
Fill the tank with hot water. But while doing so, keep the machine on a concrete or tile floor. Don’t keep it on the carpet or any wood floor as filling the tank or pouring the cleaning solution can lead to spillage. It can make stains or damage the same.
Add the cleaning solution:
Some hoover cleaning machines have a different compartment for the solution. But you need to add the solution directly to the water, while you are using a steam vac. To do that you need to check the manual instruction to know the amount of solution you should add.
Never add the solution before pouring water into the tank. If you add water later, it’ll make too much suds. After adding the solution, you can shake it a little to mix it up. But again do not shake too much as it’ll make suds too much. The machine doesn’t like too much suds in the water.
How to Use Hoover Steamvac carpet cleaner On Carpet
Once you place the tank back and switch the machine on, you are ready to start your job. First, you need to release the handle. You’ll find one button on each side of the base of the handle. The right side one is for the handle. Press it with your leg, and the handle will be released to lower. Then press the left one to start the machine.
Wet stroke:
Press the trigger inside of the handle and push the machine forward to the corner in a straight line. It is called a wet stroke, and this one is the first one. Remember to start with the farthest corner of the room so that you can exit the room without walking on the cleaned carpet.
Then pull the machine toward you while pressing the trigger. Always make the stocks slower than any strokes you make while vacuuming. It’ll let the machine loosen the dirt and debris more efficiently.
Dry stroke:
Now release the trigger and make a similar stroke on the same line. It is called a dry stroke. It will suck the water applied on the carpet along with all the dirt and soil. It’ll pour into the other tank beneath the water tank. Always make two dry strokes on a wet stroked line. It’ll make sure the maximum amount of moisture is sucked from the carpet.
Once a wet stroke and two wet strokes are done, start a new line with the same process. But overlap a little portion of the previous line. That’ll make sure no area is left without cleaning, and the stroking line won’t make any spots on the carpet. You can repeat the procedure until the tank gets empty.
Reset the tanks:
Once your water tank is empty, you need to refill it with hot water and a cleaning solution. Just do that as you did it the first time. But before putting it in its place, you want to empty the dirty tank too. S you can completely start over.
To remove the dirty water tank, you need to lay the handle down on the floor. You can see the whole tank. It has two locks on two sides. Unlock them and take the tank to your bathroom to empty it. Then put it back and put the water tank back too. Start the cleaning process over.
For heavy soil:
Standard dirty areas are cleaned with the normal process. But there are some places you need to work on a little more, like the heavy traffic areas or heavily soiled areas. In those areas, you can run the machine double. That means making two wet strokes and four dry strokes.
If that doesn’t work properly or you have stains that you have pretreated. In those areas, you need to press the trigger on the upper side of the handle. Pressing it will release more solution to the area than standard strokes. Make strokes squeezing the upper trigger then make dry strokes properly. But you need to be cautious if you don’t want to use too much water on the carpet. It can damp the padding under the carpet.
Rinse and dry the carpet
Once you cover the whole carpet and clean it thoroughly, you should rinse it with normal water. Empty the dirty tank and replace any leftover cleaning solution in the water tank with normal water. Then repeat the process as you did while cleaning. Make wet and dry strokes repeatedly and cover the whole carpet. Rinse it properly so that no solution residue is left on the carpet. Then suck up the moisture properly.
After you are done, leave the carpet for several hours to dry up completely. Remember, rinsing and drying are two recommended steps. Rinsing will help the carpet to get rid of any residues and make it look new. On the other hand, drying will keep it safe and healthy. You should dry it properly as damp carpets can grow molds or mildews.
Conclusion
By following the steps, you can clean a carpet with the help of Hoover steam vac carpet cleaner. But do not bring the furniture to the room too quickly. It can lead to damage to the legs and can make stains on the carpet. If you have long drapes, hang them up or knot them so that they can’t get damaged. Remember every little awareness can save your time and money.